Skip to main content
MG42 Parts Kit – WWII Era 7.62x51 NATO (.308) Original German - 42

MG42 Parts Kit – WWII Era 7.62x51 NATO (.308) Original German - 42

German

$2,689.99

SHUCKS! OUT OF STOCK!

Specs

SKU:
KIT0095_42
UPC:
631661687745
Caliber/Gauge::
7.62x51 NATO
Caliber/Gauge::
.308
Country of Mfg.:
Germany
Firearm Fit::
MG42

Description

We have acquired a rare selection of German-manufactured MG42 parts kits and accessories. Each kit contains the exact parts from the original firearm, with no mixed or swapped components. The kit you see is the kit you get. We have sorted through each kit and made individual part numbers to ensure you receive the kit you want.
 
The receiver markings are primarily from Maget ('44 and '45) and Gustloff ('44), and the manufacturer will be identified in the description of each kit below.
 
These MG42s were converted to .308 NATO. The top covers are slightly shorter, with some marked and others unmarked. Many mechanical parts are original MG42 components. The feed trays included are specifically for .308 ammunition, not converted 8mm trays. The bolts are heavier and often marked with production numbers indicating .308.
 
Overall, these kits are in good condition. We’ve detailed the specifics of each kit as thoroughly as possible. Please email mg42@centerfiresystems.com with the SKU / part number and any questions regarding the kits (M-F 9/5 pm), and we will be happy to answer them. If the kit in question has been sold, we will reply as such.
 

INCLUDED IN THIS KIT

CALIBER- 7.62 x 51 (.308)  

RECEIVER- 1944 Gustloff receiver with complete date code, complete MG42 ID, complete partial serial number, partial Mfg. Code, and complete proof firing stamp 

BARREL SHROUD-  Cut from the same gun as receiver. Original barrel shroud with complete front sight, rear sight assembly and rear AA sight 

 BUTTSTOCK- Post war Bakelite buttstock with complete buffer assembly, buffer spring and buttstock latch assembly 

GRIP & TRIGGER- WW2 WaA stamped Bakelite grip stick with complete trigger assembly 

TOP COVER- Converted .308 Bundeswehr top cover 

BIPOD- WW2 Kur43 marked bipod without fine tune adjustment screw and slight damage 

FLASH HIDER- Flash hider assembly complete with 10mm gas booster, barrel guide, and latch assembly 

GUIDE RAILS- Left and right guide rails  

BOLT ASSEMBLY- WW2 Complete dfb marked bolt carrier and assembly 

BBL EXTENSION- Unmarked Barrel extension 

CHARGING HANDLE- Complete bpr marked charging handle  

FEED TRAY- Bundeswehr .308 feed tray 

EJECTION PORT COVER- Complete MG42 German ejection port cover assembly 

RECUPERATOR-  Complete bpr marked recuperator assembly 

TRUNNION- Matching WW2 Trunnion set 5013 

DISCLAIMER: Parts kits are subject to state-specific shipping restrictions and cannot be shipped to California, Connecticut, Hawaii, Illinois, Maryland, Massachusetts, New Jersey, New York, or Washington. Please visit our shipping restrictions page to review all applicable restrictions for your state. Subject to change.

!